Proudly Made in the USA
Protecting Machines of Production for Over a Quarter-Century
Call: 800-321-6384 • E-mail:
Certified to ISO 9001:2008

All Categories > Monitoring Systems > 7058 4 Channel Vibration Monitor > Part No. 53205-XX  

Part No. 53205-XX, 4 Channel Model 7058 Vibration Monitor

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites

Four channels of digitally accurate vibration protection with a single versatile instrument
The 7058 4-Channel Vibration Monitor measures the vibration level of two to four points on rotating equipment located up to 1,000 feet from your central control room, ideally suited for monitoring multiple points on large equipment like turbines and multi-stage pumps. The 7058 can also monitor a single point on four individual pieces of equipment. Can be configured to: (1) accept signals from acceleration transducers, velocity transducers or noncontact probes; (2) condition signals to monitor in acceleration (g's), velocity (in/sec) or displacement (mils); and (3) low-pass, bandpass and high-pass filters for each channel to allow you to monitor for a particular problem or to remove unwanted signals generated by nearby machines.

A single analog meter allows you to view the vibration level, alarm setpoint and trip setpoint for each channel and can be set to atomatically display the highest vibration level of the four channels. Front panel Light Emitting Diodes (LED's) give immediate indication when alarm and trip setpoints have been exceeded or when power or a transducer signal has been lost. AC and DC signal outputs and multiple relays allow for connection to external devices for alarm or, if required, automatic shutdown.

Specifications  · User Benefits  · Features  · Operational Features  · Mini Specifications  · Field Adjustable Characteristics  · Field Selectable Characteristics


Transducer Input

Non-Contact Probes

Velocity Transducer



Measurement Mode

Acceleration, g's (Acceleration input only)
Displacement (Accelerometer, Velocity transducer or Non-contact probe input)

Velocity in/sec (Accelerometer or Velocity transducer input)


One common alarm relay for all channels
One common probe fault relay for all channels (not functional for Accelerometer inputs).

One common trip relay for all channels

Relay Contact Ratings

5 amps at 120 VAC, 2 amps at 28 VDC non - inductive, epoxy sealed.

Relay State

Alarm and trip relays available energized below setpoint (failsafe)
Alarm, trip and probe fault relays are latching and normally de - energized below setpoint (std.)


Independently adjustable alarm and trip setpoint for each channel, 0 - 99.6% full scale.

Time Delay

One - second fixed alarm and trip delay, up to 10 seconds on special order.

Start-up Attenuation

Remote contact closure by user provides start - up attenuation of 3:1 for alarm and trip setpoints of all channels.

Operating Temperature Range°F

+ 32 to + 130, 0 - 95% relative humidity non-condensing.

Meter Accuracy

± 2%

Input Power

115 VAC, + 10%, - 15%; 50 - 60 Hz (Standard)
220 VAC or 24 VDC (Optional).

Limit Designations

Green LED for power on.
Yellow alarm, and red trip LED for each channel

Yellow LED for signal loss (not functional for accelerometer inputs)

Output (AC)

Front panel jack supplies A.C. signal proportional to transducer input for selected channel.

Analog Output

0 - 1 VDC
0 - 5 VDC

4 - 20 mA DC

Optional Accessories

(412554-258) 30 second start up time delay
(79904-137A) Dust and Liquid Tight Cover

User Benefits
  • Low cost per channel vibration protection.
  • Accepts inputs from accelerometers, velocity transducers or non-contact probes.
  • Individually adjustable, front panel accessible, alarm and trip limit for each channel.
  • Compact dimensions for a minimum of panel space (approximately 3 3/4" x 7 1/2")

The Vitec Model 7058 Vibration Monitor provides a low - cost, compact, panel - mounted monitoring package for up to four channels of continuous vibration protection. Ideal for OEM's and end users alike, this unit accepts inputs from accelerometers, velocity transducers, or non - contact probes. The 7058 was designed specifically to provide low - cost monitoring protection for applications where one channel of protection is not enough, and a large complicated system is too much.

The Vitec Model 7058 Vibration Monitor Is completely self - contained. It includes the power supply, meter readout, power - on and transducer malfunction LED's and an individually adjustable alarm and trip setpoint with corresponding alarm and trip LED for each of its four channels. By using concepts from Vitec high density monitoring systems, all this has been accomplished in less than 29 square inches of panel space.

Operational Features
The monitor front panel contains a vertical scale meter which indicates the individual channel vibration levels, as well as the alarm and trip setpoints. A vertical row of LED's indicates when any of the four channels has exceeded its alarm or trip setpoints (yellow for alarm, red for trip). A yellow signal loss LED is illuminated upon loss of a vibration signal from any of the four transducers. A green "Power On" LED indicates that power is supplied to the monitor. The indicating LED's and the common alarm, trip and signal loss relays are latching.

The channel select switch allows a readout of any of the four channels, or on the "HI" position the meter will automatically read out the highest of the four inputs.

Beneath the meter is a switch labeled "alarm setpoint" and "trip setpoint" The alarm position allows a readout of the alarm setpoint on the vertical meter for the selected channel; the trip position allows a readout of the trip setpoint. Another switch below this one allows relays to be reset or indicates a readout of the probe standoff if a non-contact type probe is being used.

The "AC OUT" jack on the front panel provides an AC signal proportional to the vibration for any of the four selected channels for analysis purposes.

Mini Specifications
  1. 4 independent channels of vibration monitoring
  2. One enclosure contains the electronics
  3. All four channels must use the same type of transducer.
  4. Common front panel meter with channel selector switch to indicate current channel selected transducer reading.

Field Adjustable Characteristics
  1. Independent alarm setpoint for each channel.
  2. Independent shutdown (trip) setpoint for each channel.

Field Selectable Characteristics
Eight relays (optional) for use to indicate:
  • Alarm setpoint exceeded.
  • Shutdown (trip) setpoint exceeded


7058-4-Channel Vibration Monitor Description
(PDF, 31KB)

7058-4-Channel Vibration Monitor
(PDF, 111KB)

(PDF, 406KB)


Velocity Transducers

 Model 7058 Vibration Monitor spare parts 

Model 7058 Vibration Monitor Configurations